Free Presenter software features a range of useful image customizations and functions, including snapshots, video recording, image rotation

and more. Here are some highlights:

Camera Mode (default)

Provides a window with the live video

image from the camera.

 Use menus to adjust view: mirror,

resolution, etc.

 A focus frame at the center guides

you when bringing Point 2 View into

focus.

 Click on-screen icons to focus and

take snapshots.

Click the top-right arrows to enter

Full Screen mode.

Review Mode

Review snapshots and video you have

taken.

 Use menus to adjust view or edit

photos.

 Use thumbnails for quick overview of

your library.

Full Screen

Point 2 View’s image will take up the

entire screen. This is particularly useful

for projecting the image in classroom or

conference settings.

 Click the top-right arrows again to

return to a smaller window.

 Click on the screen to hide the icons

and provide an unobstructed image.

Click again to bring the icons back .

 Focus/Snapshot icons are available

in this mode also.

Quick Start Guide

Point 2 View

www.ipevo.com

Your Point 2 View product package should contain these items:

• Point 2 View USB Camera

• Weighted stand with adjustable arm

• Quick-start guide (this document)

You may wish to use Point 2 View with IPEVO Presenter

software. You may download it at:

http://support.ipevo.com/presenter

Step 1:

Double-click the downloaded ﬁle and follow the prompts to

install Presenter.

Note: By installing the latest version of Presenter, the older version

of Presenter on your computer will be removed or replaced.

Step 2:

Connect Point 2 View’s USB cord to any open USB port on your

computer.

Step 3:

Launch the Presenter software. A window containing a live

video image from your Point 2 View should appear. Point 2

View is now ready to use.

2. Installing IPEVO Presenter Software

3. The Software Interface at a Glance

1. Package Contents

Single

Customer Service (International)

Email: service@ipevo.com

Tel: +886-2-5550-8686

4. Taking Snapshots

http://www.ipevo.comGO!

Customer Service (USA)

Email: cs@ipevo.com

Tel: +1-408-490-3085

Follow these steps to learn how to bring Point 2 View into focus and take a snapshot.

Attach Point 2 View to the stand and

bend, rotate, or extend the stand

to achieve the best position for an

optimum view. You can also use your

hand to point the camera.

5. Positioning Point 2 View

Overview of controls

(Hardware)

Step 1: Bring Point 2 View into focus

Before taking a snapshot, make certain that you are in

Camera mode and the image is in focus. Toggle the AF switch

or press the Focus key to bring Point 2 View into focus, if

necessary.

Step 2: Take snapshot

Press the Snapshot key. A shutter sound will be generated

and the screen will freeze for a moment, giving you an instant

preview.

Step 3: Review the photo

Go to Review mode. Your new photo will appear on the

screen. You can also view previous snapshots using the

thumbnails at the bottom.

(Software – Camera mode)

Snapshot key:

Takes snapshot

Focus key:

Brings Point 2

View into focus

AF Switch:

Selects Autofocus mode

Continuous (C) or Single (S)

Shows current

AF status

Share with others

Use one of the side connectors on the

head of the stand to position Point 2

View for documents.

Show yourselfShow what you see

...Or hold Point 2 View in your hand.

You can get as close as 2˝ (5cm) away.

Attach Point 2 View to the stand…